Power Dynamics PDX100 Manuel D'instructions page 5

26. PITCH SLIDE CONTROL
Use this fader to increase or decrease the speed of the track. The percentage is displayed. First of all
push button 28.
27. PITCH BEND –/+ BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when it released. The pitch
will automatically rise when the + button is pressed and return to the original pitch when it is released.
28. PITCH BUTTON
If you push this button, the adjustement of the pitch potentiometer is available.
29. LED PITCH
It is used to indicate different pitch ranges
30. TAP BUTTON
Press this button in the rhythm of the music. The display (15) shows the beats per minute (BPM)
31. PROG BUTTON
In STOP mode, you can program several tracks ( 20 tracks max ) :
Press the STOP button to enter in the stop mode
Press the PROG button to enter in the program mode
Use the skip track buttons to choose the track you want to listen then press the PROG button to enter your
choice. Use one more time the skip track buttons to choose the track you want to listen then press the PROG
button to enter your choice Repeat the operation to select all the track you want to listen Press the
PLAY/PAUSE button to start the playback.
USABLE DISCS AND USB DEVICES PLAYABLE MUSIC FILE FORMATS
This unit supports USB mass storage class USB devices (external hard disks, portable flash memory devices,
digital audio players, etc.). When there are many folders or files, some time may be required for loading.
Folders and files exceeding the limits cannot be displayed.
USB devices that cannot be used
• Optical disk type devices such as external DVD / CD drives, etc., are not supported.
• USB hubs cannot be used.
Cautions on using USB devices
• Some USB devices may not operate properly. Please note that distributor will accept no responsibility whatsoever
for loss of data recorded on USB devices.
• It may happen that, when a current above the allowable level is detected in this unit's USB port, the [USB STOP]
indicator flashes, the power supply to the USB device is cut off and communications with the USB device are
interrupted. To restore normal operation, disconnect the USB device from this unit. Avoid reusing USB
devices for which an excess current has been detected. If normal operation is not restored (if communications
cannot be established) after the above procedure is performed, try turning off this unit's power then turning it back
on.
• If multiple partitions are set for the USB device, the device may not be recognized.
• USB devices equipped with flash card readers may not operate.
• Depending on the USB device you are using, the desired performance may not be achieved.
About USB devices
This unit supports music files in the formats shown here. 32 kHz, 44.1 kHz, CBR, VBR 48 kHz 32 kbps to MP3
.mp3 MPEG-1 16 bit 320 kbps
Type File extension Compatible
fAbout MP3 files
MP3 files can have a constant bit rate (CBR) or a variable bit rate (VBR). Both types of files can be played on the
CD players, but the search and super fast search functions are slower with VBR files. If your priority is operability,
we recommend recording MP3 files in CBR.
SPECIFICATIONS
Anti-Shock buffer memory:
Range of adjustments:
Power supply:
Power consumption:
Admissible media:
Output voltage:
Frequency response:
Dimensions:
Weight.:
20 seconds
+/-4%, 8% ,16%
AC 100-240V~50/60Hz
20W max.
CD, CD-R, MP3-CD, USB, SD, SDHC
1 VRMS/10 kOhm
20-20000 Hz
L290XW226XH300mm
2 Kgs