Publicité
Les langues disponibles
Les langues disponibles
6. EJECT BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: Disc holder will not open unless stop or pause button has been pushed first.
7. SD CARD SLOT
8. USB PORT
Support USB playing
9. CD/USB/SD BUTTON
By pressing this button repeatedly, you can select the playback sourceCDdrive/USB interface/SD card
reader
10. Rotary dial
As track selection function, choosing one scale clockwise will play the next track while selecting one scale
counterclockwise will play the last track. It will affect only by pressing the encoder within 3 seconds otherwise
the previous operation will be cancelled.
11. FOLDER BUTTON
Allows you to navigate through folders similarly in either USB or CD mode. The LED lights will be on
12. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to
play. When paused, pressing play will only set a new cue point if the jogwheel has been moved.
13. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started and will
pause the track. Holding down CUE will start playback from this point and releasing CUE will cause it to
return to that point. So if the track is paused you can use the JOGWHEEL to locate a new cue point.
14. JOG WHEEL
The jog wheel allows you to create scratch effects, to fast-forward or rewind within a track and to mokify the
playback speed. If you have already pressed the VINYL(16) button (button is lit up in blue), you can create
scratch effects in pause and playback mode by moving the jog wheel forwards and backwards. Turn the jog
wheel clockwise to fast-forward within the track. Turn the jog wheel anti-clockwise to rewind within the track.
The faster you turn the jog wheel, the faster the track will skip forwards/backwards. If the MINYL button is not
activated (button is not lit up), you can use the jog wheel in pause mode to fast-forward or rewind the track. In
playback mode you can modify the playback speed. Rotate the jog wheel clockwise to increase the speed.
Rotate the jog wheel anti-clockwise to decrease the speed.
15. DISPLAY LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.
16. VINYL Button
Press this button in order to activate the scratch function of the jogwheel(14). The button is lit up in blue.
17. BRAKE
In play mode, push the brake button at first, starts the track at a speed that is slower than normal play back.
When you stop the track, the track slows down before playback is stopped completely.
18. REVERSE
Push the reverse button to play your track in reverse, push the reverse button again to cancel this feature.
19. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
20. LOOP IN BUTTON
You may set the beginning point of the loop system and indicate on the display.
21. LOOP OUT BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. To finish the
loop, press again this button.
22. RELOOP BUTTON
This button is used to start the last saved loop. To finish the loop, press the re-loop button again.
23. SINGLE / CONT BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD (15). In SINGLE mode, after each track, the unit stops the reading. In CONTINUOUS
mode, the unit reads all tracks and stops.
24. TIME BUTTON
Use this knob to choose the time mode: elapsed time, remaining time or total remaining time. With MP3 files
the total remaining time of the CD is not displayed.
25. SEARCH
BUTTON
You may forward and backward to navigation through one track. Constantly pressing will start up double
quick
Publicité
