Samsung 4 Serie Instructions D'utilisation page 20

Picture Options
You can set detailed picture settings.
1 Press the MENU button to display the menu.
 Press the ENTER button to select Picture.
 Press the ▲ or ▼ button to select Picture Options, then press
the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5 When you are satisfied with your setting, press the ENTER
button.
 Press the EXIT button to exit.
➢
In PC mode, you can only make changes to the Color Tone
and Size from among the items in Picture Options.
 Colour Tone: Cool/Cool1/Normal/Warm1/Warm
➢
When the picture mode is set to Dynamic or Standard,
Warm1 and Warm cannot be selected.
 Size: Auto Wide/1:/Wide Zoom/Zoom/4:/Just Scan
You can select the picture size which best corresponds to your
viewing requirements.
− Auto Wide: Expanding and pulling up the picture from 4:3 to
16:9 ratio.
− 1:: Sets the picture to 16:9 wide mode.
− Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the
− Zoom: Magnify the size of the picture vertically on screen.
− 4:: Sets the picture to 4: normal mode.
− Just Scan: Use the function to see the full image without
any cutoff when HDMI (720p/1080i), or Component (1080i)
signals are input.
After selecting Just Scan in HDMI (100i) or Component
(100i) mode:
Press the ◄ or ► button to select
Press the ▲, ▼, ◄ or ► button to move the picture up, down, left and right.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize
the setting.
➢
With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
➢
For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
➢
You can change the picture size simply by pressing the P.SIZE button on the remote control.
➢
Depending on the input source, the picture size options may vary.
➢
The items available may differ depending on the selected mode.
➢
Auto Wide function is available only in TV, Ext.1, Ext., AV, and S-Video mode.
➢
Settings can be adjusted and stored for each external device you have connected to an input of the
TV.
➢
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Positioning and Sizing the screen using Zoom
 Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down
direction using the ▲ or ▼ button as well as the screen size.
 Move the screen up/down using the ▲ or ▼ button after selecting the
button.
 Resize the screen vertically using the ▲ or ▼ button after selecting the
button.
BN68-01528A-Eng.indb 20
by pressing the ► or ENTER button.
, then press the ENTER button.
English - 0
T V Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint G50
Detailed Settings
Picture Options
Reset : OK
Move Enter
T V
Picture Options
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 1:
Digital NR : Auto
Real 100 Hz Demo : Off
DNle : Off
HDMI Black Level : Normal
Blue only mode : Off
Screen Burn Protection
D Effect
Move Enter
T V Size
Auto Wide
1:
Wide Zoom
Zoom
4:
Just Scan
Move Enter
by pressing the ◄ or ►
by pressing the ◄ or ►
Continued...
2008-04-18 오후 1:44


5
45
50
50
R50



Return









Return
Return