GE GTH18DBRRCC Manuel D'utilisation Et D'installation page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

About the shelves and bins.
Not all features are on all models.
Some models have wire shelves that
can be adjusted in the same manner.
Rearranging the Shelves
Shelves in the refrigerator and freezer compartments are adjustable.
Refrigerator Compartment
To remove:
Tilt the shelf up at the front.
Lift the shelf up at the back and bring
the shelf out.
To replace:
While tilting the shelf up, insert the top
hook at the back of the shelf in a slot
on the track.
Lower the front of the shelf until the
bottom of the shelf locks into place.
Freezer Compartment
To remove:
Lift up the left side of the shelf and
slide it left into the center of the shelf
supports.
Rotate the right side of the shelf up and
out of the shelf supports.
To replace:
Holding the shelf diagonally, insert the
left end of the shelf into the center of
the shelf supports on the side wall.
Insert the right end of the shelf into
the shelf supports on the side wall.
Rest each end of the shelf on the
bottom of the shelf supports.
www.GEAppliances.com
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières