Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
3. Remove middle hinge, screws, screw caps and
plastic inserting nails. Install them on the
other side. Take off the lower door and put it
away.
4. The disassembly and installation of bottom
parts:
A. Disassemble lower hinge and screws.
Then install them on the other side and
consolidate the lower hinge. Note: the
refrigerator-freezer incline angle less 45°.
B. Swap over the position of the adjustable foot
to the other side of the cabinet.
GB-20
C. Swap over the position of the lower door
block to the other side. Install the screws and
consolidate them.
5. Install the lower door and take care of its
alignment with the appliance body.
6. Tighten the screws of the middle hinge on
the reversible side.
7. Install the top door and remove the existing
top door block. Install a new top door block
(not the same one) on the reversible side.
Screw it down.
ENGLISH
GB-21
Publicité
