Levana Safe'N See LV-TW501-C Mode D'emploi page 8

All manuals and user guides at all-guides.com
SETTING UP YOUR SYSTEM
Battery Operation
The camera unit can be powered using 4 AAA batteries instead of the
included AC adapter.
1. Remove the battery compartment cover on the bottom of the camera base, using a
small phillips (cross) head screwdriver.
2. Place 4 AAA batteries (not included) in the compartment, paying attention to the
labelled polarity markings.
3. Replace the battery compartment cover using the small screwdriver.
Note: The power LED will flash when the battery charge is low.
Attaching Power to the Camera
1. Connect the AC adapter to the transmitter as shown in the diagram.
2. Connect the small end into the DC Jack on the back of the camera, connect the other
end of the adapter into an available wall outlet.
Note: This camera is meant to be used in conjunction with the LV-TW501 Digital
Baby Monitor system. You cannot use this camera with any other system. For
details on how to connect your additional camera to a parent unit, please see
the pairing instructions on page 10. If you need to purchase a LV-TW501 system
please visit www.mylevana.com or call our support team at 1-866-946-7828.
8