Levana Safe'N See LV-TW501-C Mode D'emploi page 10

All manuals and user guides at all-guides.com
PAIRING THE DEVICES
The camera must be paired (connected) to a monitor (parent unit not
included). The monitor comes with the LV-TW501 packaged system. Please see
our website at www.mylevava.com or call our support team at 1-866-946-7828 if you
cannot connect your camera with a monitor, or if you need to purchase a monitor.
1. Slide the power switch
hand side of the camera to the OFF position.
2. Cover the light sensor on the front of the
camera with your finger or a cloth.
3. Slide the power switch
to the ON position.
4. With the monitor switched on, press and
hold the play/pause button
seconds.
5. The pair icon
screen and the power LED on the camera will
blink for a few seconds.
6. Press the menu button
7. C1... OK! will appear when the camera and monitor are paired successfully and then
the video and audio will be transmitted automatically.
Note: If "C1...X" appears (pair failed) instead of "C1...OK!" you will have to remove all
sources of power from the camera and monitor and start the pairing process
over again.
on the right
on the camera
for two
will appear on the
on the monitor to confirm the setting.
10
Light Sensor