If the system is used within 10 m (about
30 ft) of a wireless LAN device, turn off
the wireless LAN device.
Interference to other devices
Microwaves emitting from a BLUETOOTH
device may affect the operation of
electronic medical devices. Turn off the
system and other BLUETOOTH devices in the
following locations, as it may cause an
accident.
where inflammable gas is present, in a
hospital, train, airplane, or a gas station
near automatic doors or a fire alarm
To be able to use the BLUETOOTH function, the
BLUETOOTH device to be connected requires the
same profile as the system's.
Note also that even if the same profile exists,
devices may vary in function depending on their
specifications.
Due to the characteristic of BLUETOOTH wireless
technology, the sound played on the system is
slightly delayed from the sound played on the
BLUETOOTH device during talking on the
telephone or listening to the music.
This system supports security capabilities that
comply with the BLUETOOTH standard to
provide a secure connection when the
BLUETOOTH wireless technology is used, but
security may not be enough depending on the
setting. Be careful when communicating using
BLUETOOTH wireless technology.
We do not take any responsibility for the leakage
of information during BLUETOOTH
communication.
A device featuring the BLUETOOTH function is
required to conform to the BLUETOOTH standard
specified by Bluetooth SIG, and be
authenticated. Even if the connected device
conforms to the above mentioned BLUETOOTH
standard, some devices may not be connected
or work correctly, depending on the features or
specifications of the device.
Noise or sound skips may occur depending on
the BLUETOOTH device connected with the
system, the communication environment or the
usage environment.
26
US
Specifications
Section for Speaker
Speakers
Super tweeter: Approx. 20 mm
13
(
/
inches) diameter × 2
16
Midrange: Approx. 40 mm (1
diameter × 2
Subwoofer: Approx. 69 mm (2
diameter × 1
Section for Amplifier
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
Power Output (reference)
Super tweeter: 15 W × 2 (at less than 10 %
harmonic distortion, 10 kHz)
Midrange: 15 W × 2 (at less than 10 %
harmonic distortion, 1 kHz)
Subwoofer: 30 W (at less than 10 %
harmonic distortion, 100 kHz)
Section for Network
Compatible standards
IEEE 802.11 a/b/g/n (WEP 64 bit,
WEP 128 bit, WPA/WPA2-PSK (AES), WPA/
WPA2-PSK (TKIP))
Radio frequency
2.4/5 GHz band
Section for BLUETOOTH
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight Approx. 10 m (about 30 ft)*
Radio frequency
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Communication System
BLUETOOTH Specification Version 3.0
Compatible BLUETOOTH Profiles*
A2DP (Advanced Audio Distribution
Profile) / AVRCP (Audio Video Remote
Control Profile)
3
Supported codec*
4
5
SBC*
/ AAC*
/ LDAC*
5
/
inches)
8
3
/
inches)
4
1
2
6