Modular 70/40 GRACQE Serie Manuel D'installation, Emploi Et Entretien page 15

- Do not use chemical products containing chlorine.
- Do not use sharp objects which might scratch and
damage the surfaces.
COLLECTION TRAYS
- Clean the surface, removing grease, oil, food
residue etc.. .
GAS GRILL
Cleanind the burner and brazier grille
IMPORTANT: BEFORE CARRYING OUT
ANY CLEANING OPERATIONS, MAKE
SURE THE GRILLES ARE COLD.
- Lift up and remove the cooking grille and the
splashguard.
- Remove the tiles.
- Proceed to clean the burner around the fl ame zone
and along the flame protector apertures, removing
all traces of dust and burnt-on residue whilst taking
care not to enlarge the flame apertures.
- Using a scraper, clean the fi ns of the combustion
chamber that convey cooking juices into the
collection drawer and then wipe with a damp cloth.
- Take care not to damage the pilot ignition unit.
- Refit the tile, taking care to insert the front pins in
their seats.
GAS LAVA STONE GRILL
IMPORTANT: BEFORE CARRYING OUT
ANY CLEANING OPERATIONS, MAKE
SURE THE GRILLES ARE COLD.
- Lift up and remove the cooking grille and the brazier
containing the lava stone.
- Proceed to clean the burner around the fl ame zone
and along the flame protector apertures, removing
all traces of dust and burnt-on residue whilst taking
care not to enlarge the flame apertures.
ELECTRIC GRILL
IMPORTANT: BEFORE CARRYING OUT
ANY CLEANING OPERATIONS, MAKE
SURE THE HEATING ELEMENTS ARE
COLD.
All manuals and user guides at all-guides.com
15
- Disconnect the appliance from the power supply.
- Remove the grille and splashguard.
- Clean the inside of the grill with a scraper.
IMPORTANT: DO NOT CLEAN THE
ELEMENTS AND DO NOT USE WATER
INSIDE THE GRILL SINCE THE APPLIANCE
CONTAINS ELECTRICAL COMPONENTS.
INSTRUCTIONS FOR
V.
MAINTENANCE
REMINDERS FOR THE MAINTENANCE
TECHNICIAN
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE TO
OBSERVING THE FOLLOWING RULES.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-ventilated
room.
Do not obstruct any air vents or drains present on
the appliance.
Do not tamper with appliance components.
Appliance maintenance and conversion to a
different type of gas must be carried out by
qualified technicians
manufacturer, in compliance with current safety
standards and the instructions in this manual.
CONVERSION TO ANOTHER TYPE OF
GAS
See Chapter " Instructions for installation ".
COMMISSIONING
See Chapter " Instructions for installation ".
TROUBLESHOOTING
GAS GRILL
The pilot burner does not light.
authorized by the