DeWalt D25304DH Traduction De La Notice D'instructions Originale page 17

DUST EXTRACTION SYSTEM
D25304DH
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Contact pressure
Max. drilling depth
Max. drilling diameter
Noise values and vibration values (triax vector sum) of the combination of
power tool and connected dust extraction system according to EN62841-2-6. To
calculate the noise and vibration values of the combination of power tool and
connected extraction system, the L
Tool) and ah, (Power Tool) values from the operationg instructions of the
HG
attached power tool are required.
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Dust extraction will not increase the vibration of the attached power tool.
Vibration emission value a
h,HD
Uncertainty K
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
D25304DH
N 80
mm 180
mm 26
(Power Tool), L (Power Tool), K (Power
PA WA
dB(A)
L (Power Tool)
PA
+3dB
dB(A)
L (Power Tool)
WA
+3dB
dB(A)
K (Power Tool)
=
m/s 2 a (Power Tool)
h,HD
m/s 2 K (Power Tool)
EC-Declaration of Conformity
Machinery Directive
Dust Extraction System
D25304DH
D WALT declares that these products described under Technical
e
Data are in compliance with the following Directive and
Standard: 2006/42/EC, EN62841-1:2015 + A11:2022.
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europa
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
18.11.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Dust Extraction System
D25304DH
WALT declares that these products described under Technical
D
e
Data are in compliance with the following Regulation and
Standard:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841-1:2015 + A11:2022.
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
Berkshire, SL1 4DX
England
18.11.2022
EnGLIsh
WALT at the following
e
WALT.
e
WALT at the following
e
WALT.
e
15