Whirlpool WL B4060 CPNE Manuel D'instructions page 7

DAILY USE
SWITCHING THE HOB ON/OFF
To turn the hob on, press the power button for around 1 second.
To turn the hob o , press the same button again, and all cooking zones
will be deactivated.
POSITIONING
Locate the desired cooking zone by referring to the position symbols.
Do not cover the control panel symbols with the cooking pot.
Please note: In the cooking zones close to the control panel, it is advisable to
keep pots and pans inside the markings (taking both the bottom of the pan
and the upper edge into consideration, as this tends to be larger).
This prevents excessive overheating of the keypad. When grilling or frying,
please use the rear cooking zones wherever possible.
ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING
POWER LEVELS
To activate the cooking zones:
Press the "+" or "−" button of the required cooking zone to activate it and
adjust the power. The level will be shown in line with the area and the
indicator light identifying the active cooking zone. The "P" button can be
used to select the fast heating function (Booster).
FUNCTIONS
OFF
OFF
FLEXICOOK
By selecting the "FLEXICOOK" button, you can combine two cooking
zones and use them at the same power by covering the entire surface
with a large pot or partially with a round/oval pot.
The function always remains on and, when using only one pot, can be
moved over the entire area. In this case, both left-hand keypads can be
used indi erently.
Ideal for cooking with oval or rectangular pots or with pan supports.
To deactivate the function, press the "FLEXICOOK" button.
N.B. Special functions cannot be selected when using this feature.
IMPORTANT: Place the pots in the center of the cooking zone so that they
cover at least one of the reference points (as shown below).
To deactivate the cooking zones:
Press the "OFF" button to the left of the power adjustment.
3 sec
To lock the settings and prevent it from accidentally switching on, press
and hold the OK/Key lock button for 3 seconds. A beep and a warning
light above the symbol indicate that this function has been activated. The
control panel is locked except for the switching o function (
the controls, repeat the activation procedure.
There are two timers - one controls the left-hand cooking zones, while
the other controls the right-hand cooking zones.
To activate the timer:
Press the "+" or "−" button to set the desired time on the cooking zone in
use. An indicator light will be activated in line with the speci c symbol
. Once the set time has elapsed, a beep will sound, and the cooking zone
will switch o automatically.
The time can be changed at any point, and several timers can be
activated simultaneously.
In case 2 timers on the same side of the hob are activated simultaneously,
"Zone selection indicator" ashes and the relative cooking time selected
is displayed on the central display".
P
To deactivate the timer:
Press the "+" and "−" buttons together until the timer is deactivated.
This LED (when ON) indicates that the timer has been set for the cooking
zone.
P
P
The "6
Place the pot in position and select the cooking zone.
Press the "6
The indicator for the rst special feature available for the cooking zone
will light up.
Select the desired special function by pressing the "6
one or more times.
The function is activated once the
To select another special function, press "OFF" and then the "6
button to choose the required function.
To deactivate the special functions and return to manual mode, press
"OFF".
The power level when using special functions is pre-set by the hob and
cannot be modi ed.
This function allows you to bring food to the ideal temperature for
melting and maintain the food condition without the risk of burning.
This method is ideal, as it does not damage delicate foods such as
chocolate and prevents them from sticking to the pot.
OK
CONTROL PANEL LOCK
TIMER
TIMER INDICATOR
OFF
3 sec
OFF
6 SENSE
TH
Sense" button activates the special functions.
th
Sense" button. The display of the selected area will show "A".
th
3 sec
MELTING
). To unlock
P
P
Sense" button
th
button has been pressed to con rm.
OK
th
EN
Sense"