Fender PRINCETON CHORUS DSP Mode D'emploi page 9

PRINCETON CHORUS DSP - SPECIFICATIONS
POWER REQUIREMENTS:
POWER AMP POWER OUTPUT:
RATED LOAD IMPEDANCE:
PREAMP INPUT IMPEDANCE:
NOMINAL LEVEL:
MONO EFFECTS LOOP:
STEREO EFFECTS LOOP:
_____________________________________________________________________________
SPEAKER COMPLEMENT:
All manuals and user guides at all-guides.com
TYPE:
PART NUMBER:
SENSITIVITY:
DIMENSIONS:
WEIGHT:
Fender®, Tone-Master®, and Princeton Chorus® are
registered trademarks of FMIC
Product specifications are subject to change without notice
PR 424
022-5700-020 (120V)
022-5730-020 (240V) Aust
022-5740-020 (230V) UK
022-5760-020 (230V) Eur
022-5770-020 (100V)
100V AC, 50/60 Hz: 180W
120V AC, 60 Hz: 180W
230V AC, 50 Hz: 180W
240V AC, 50 Hz: 180W
25W per channel, (50W Total) @ 5% THD
8Ω per channel
1.4V RMS
INPUT 1: >1MΩ / INPUT 2: >130kΩ
INPUT 1: 100mV / INPUT 2: 200mV
NOMINAL LEVEL: -10dBv
SEND OUTPUT IMPEDANCE: 1kΩ (Balanced)
RETURN INPUT IMPEDANCE: 22kΩ (Balanced)
NOMINAL LEVEL: -10dBv
SEND OUTPUT IMPEDANCE: 1kΩ
RETURN INPUT IMPEDANCE: 18kΩ
(Specifications for each channel:
Left on Tip, Right on Ring)
TWO FENDER SPECIAL DESIGN
10", 8Ω SPEAKERS (P/N 0029753000)
HEIGHT: 17
1/2
WIDTH: 22
3/8
DEPTH: 10
3/16
40 lb
9
in 44 cm
in 57 cm
in 26 cm
18 kg