Cleaning The Filter - Maytronics Dolphin COMM. 12 Mode D'emploi

Exiting manual direction control mode and setting the automatic mode
Press the Manual/Automatic select button and then choose the desired parameters according to the following table:
Cleaning cycle indicator
This determines the length of the cleaning cycle.
Note:
• After 2 minutes if no button is pressed, the remote control unit will shut down and the Robotic Pool
Cleaner will continue to work in the previous settings.

8. CLEANING THE FILTER

Clean the Robotic Pool Cleaner filter after every cleaning cycle as follows:
1. Press the latch on the top of the Robotic Pool Cleaner to open the top cover.
2. Remove the filter chamber from the robot and separate its parts.
3. Wash the fine filter cartridge with water pressure from the inside out.
4. Return the fine filter to the filter chamber and put the chamber back in the Robotic Pool Cleaner.
5. The robot is ready for a new cleaning cycle.
COMM. 12 Robotic Pool Cleaner
1. To exit the manual direction control mode, press the
Manual/Automatic select button once only.
2. The digital screen will light up, and the cleaning cycle
indicator can be changed.
1. To select the chosen cleaning cycle use the Turn Right or Turn
Left arrows. When you reach the required function press the
Set/OK button.
Fast
4-hour cycle
User Instructions
|
Efficient (Default setting)
5-hour cycle
Fine filter
Filter chamber
Extra
6-hour cycle
Cover latch
7