Uline H-10025 Mode D'emploi page 2

MOUNTING
WALLS WITH 2 x 4" STUDS
Mount cabinet securely to studs using four wood screws
installed through mounting holes in cabinet.
SHEETROCK
Mount 3/4" board to the wall using toggle bolts. Height
and width of the board is dependent on cabinet size.
The board should extend a minimum of two inches
beyond all sides of the cabinet. Mount cabinet to
1/4" Mounting Holes
board using four wood screws installed through
mounting holes in cabinet.
CINDERBLOCK OR CEMENT
Mount cabinet using four toggle bolts or masonry lead
screw expansion anchors installed through mounting
holes in cabinet.
CONCRETE OR TILE WALL
Mount cabinet using four masonry lead screw
expansion anchors installed through mounting holes
in cabinet.
Back of Cabinet
STEEL POSTS OR BEAMS
Special tools and fasteners are required. Use
professional service company to mount cabinet.
1-800-295-5510
uline.com
PAGE 2 OF 6 0222 IH-10025