Burley DASH FM Mode D'emploi page 19

Adjusting the Harness
The upper shoulder strap attachment points have two positions that can be adjusted according to
the child's size.
1. Access the Harness Connector via the rear of the Bicycle Seat [Figure 30].
2. Rotate the Harness Connector sideways, and slide it through the lower harness adjustment hole
and the slot in the seat pad [Figure 31].
3. Pass the Harness Connector through the upper harness adjustment hole, then rotate the
Harness Connector so that it is secure against the rear seat back [Figure 32].
4. Repeat steps 1-3 for the other shoulder strap. Ensure that harness straps are not twisted during
harness adjustment [Figure 33].
NOTE: If you are adjusting from the upper harness position to the lower harness position, the
Harness Connector will need to be passed back through the slot in the seat pad before passing
it through the lower harness adjustment hole.
Figure 32
OWNER'S INSTRUCTION & SAFETY MANUAL
All manuals and user guides at all-guides.com
Figure 30
Figure 31
Figure 33
BURLEY.COM
19
ENG