Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Your After Sales Service - AEG RDB76311TX Notice D'utilisation

CHAPTER - 5

Transportation and Changing of Installation Position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow the
instructions for transportation on the package for
re-transportation.
• Remove movable parts (shelves, accessories,
vegetable bins etc.) or fix them into the fridge
against shocks using bands during re-positioning
and transportation.
Carry your fridge in the upright position.

Repositioning the Door

• It is not possible to change the opening direction of your fridge door, if the door handles
on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
CHAPTER - 6
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR TYPE
SR
SR – Set value
blink on freezer
set value screen
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
BEFORE CALLING YOUR AFTER SALES
SERVICE
MEANING
"Failure
Warning"
Freezer comp. Not
Cold enough
WHY
There is/are some
part(s) Out of order
or there is a failure in
cooling process
This caution will be seen
especially after long
term of power failure
EN -23-
WHAT TO DO
Call Service for assistance as
soon as possible.
1. Do not freeze the foods
that are thaw and use in short
time period.
2. Set the freezer
temperature to colder values
or set the super freeze , until
the compartment gets to
normal temperature.
3. Do not put fresh food until
this failure is off.