Samsung HT-D5330 Guide D'utilisation page 36

Setup
Musical Room Calibration
By setting the Musical Room Calibration (MRC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 5.1-channel sound fi eld optimized for
your environment.
500mA
ASC IN
Musical Room Calibration Mode
You will hear either the Musical Room Calibration
mode or the User Speaker Settings.
•
Off : You will hear sound in the the Speaker
Setting value.
•
On : You will hear sound in the Musical Room
Calibration mode.
Measurement
1. Plug the ASC microphone into the ASC IN jack.
2. Place the ASC microphone at the listening position.
•
Musical Room Calibration will be automatically
set up in the following sequence:
Front L Center
R Surround L
•
Press the RETURN button to cancel the
Musical Room Calibration Setting.
36
English
HT-D5330_XAC_0215.indd 36 HT-D5330_XAC_0215.indd 36
All manuals and user guides at all-guides.com
ASC
microphone
Front R Surround
Subwoofer
✎
NOTE

Setting the Musical Room Calibration
function takes about 3 minutes.

The Musical Room Calibration setup can be made
when there is no disc in the product.

If the ASC microphone is disconnected during the
Musical Room Calibration setup, the setup will be
canceled.

When the Musical Room Calibration function is
activated, the DSP, Dolby Pro Logic ll and SFE
Mode will not work.

If the product is connected to external devices or
other components (such as an iPod, AUX, D.IN),
the Musical Room Calibration Setup may not work
properly.

Noise may result in wrong measurement.
So please proceed with the measurement in a
quiet room to obtain proper calibration.

Place the microphone on the main listening
position.

Nothing should get in the way between speakers
and microphone.

Note that the test tone of the speaker may be
loud when conducting the test.

Do not place the microphone behind the furniture
or too close to the wall. Otherwise, it can produce
an incorrect test result.
User EQ
You can confi gure the equalizer settings manually
to your preference.
Settings
User EQ
Display
0 0 0 0
Audio
6
·
Network
·
·
·
System
·
0
·
Language
·
·
Security ·
·
-6
General
250Hz 600Hz 1kHz 3kHz 6kHz
Support
Reset > Adjust < Move ' Return
A
0 0 0
10kHz 15kHz
2011-02-15 ¿ÀÈÄ 7:39:01 2011-02-15 ¿ÀÈÄ 7:39:01