Panasonic EW1511 Mode D'emploi page 17

Wall mounting
Be sure to choose a solid wall or a crosspiece to
install the charging stand.
<How to install>
1 Tighten two commercially
available round wood
screws (nominal
diameter: 2.7 - 3.1 mm) at
intervals of 29 mm so that
the screw head can float
about
3.0 mm from the wall.
 Hook the wall-mounting
screw holes on the back
of the charging stand on
the screws, and fix them.
<How to remove>
a Lift the charging stand.
b Pull it forward.
EW1511.indb 17
Frequently asked questions
29 mm
Approx. Wall-mounting
3.0 mm screw holes
ⓑ
ⓐ
Quesiton
Will the battery Please charge it once every 6
be exhausted months if you have not used
▶
after a long it for over 6 months since the
period of disuse? battery may deteriorate.
Can the battery
The service life of the battery
be charged
▶ will not be affected thanks to
before every
the use of a lithium ion battery.
use?
Answer
17
2019/3/28 20:44:41