Panasonic EW1511 Mode D'emploi page 16

4
After drying, put the main unit
upright on the charging stand.
1 Wipe any water away from the
nozzle and the main unit with a
towel or the like, and dry them
in a well-ventilated shade.
 Store it in the upright position
・ Attach the bottom cover, and
put the main unit upright on the
charging stand.
How to attach the bottom
cover
a Insert the claws (2 places) on
the front of the bottom cover
into the main unit.
b Press in the hooks (2 places) on
the back.
Notes
• Do not wash with lukewarm water exceeding 50 °C.
• Use neutral kitchen detergent and rinse well with
water to ensure no detergent remains after cleaning.
• Never use thinners, benzine, or alcohol.
(Doing so may cause malfunction, or cracking or
discolouration of the parts.)
If the identification ring comes off
Align the nozzle with the identification
ring (in any direction) to install it.
• Even if the identification ring is not
attached, the performance of the
nozzle is not affected.
16
EW1511.indb 16
When the water jet is poor
Remove the dirt from the filter (the tip of the suction
hose).
Rub it gently with a soft brush.
ⓑ
ⓐ
When dirt is a concern
Wipe with a dry cloth.
(Do not rinse it with water.)
Charging stand
Filter
Filter
Suction
hose
Brush
AC adaptor
2019/3/28 20:44:41