Panasonic EW1511 Mode D'emploi page 12

How to use
1
Fill the water tank with water.
1 Open the water supply cover.
 Add water while keeping the
main unit level.
 Close the water supply cover
securely.
• Always use new tap water or
lukewarm water.
• If the water feels cold, use
lukewarm water with a
temperature of 40 °C or less.
If the water supply cover
comes off
a Align the washer of the
water supply cover with the
water supply port.
b Press in until a "click" is
heard.
12
EW1511.indb 12
2
Install the nozzle.
1
2
3
Press the level switch, and
select the water pressure
level.
Full-water position
3
• When you press the level
switch, the water pressure
level that was used last time is
selected. Then each time you
press the level switch,
the water pressure level is
switched as follows: 1 (weak)
→ 2 → 3 → 4 → 5 (strong) →
1...
a
About the water pressure level memory
function. The last selected water pressure
Washer
level will be remembered, from which the
Water supply port
appliance will start next time.
• When the appliance has not been used for a long
b
time or when the battery is used up, the water
pressure level will return to 1.
Press in fi rmly
strong
(water pressure level 5)
weak
(water pressure level 1)
水圧レベル
3 の場合
2019/3/28 20:44:40