Télécharger Imprimer la page

Taurus Maxim's Manuel D'utilisation page 15

Masquer les pouces Voir aussi pour Maxim's:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Before use:
- Before using this product for the
first time, it is advisable to test it
without food.
- Before using the product for the first
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
- Some parts of the appliance have
been lightly greased. Consequently,
the first time the appliance is used a
light smoke may be detected. After a
short time, this smoke will disappear.
Use:
- Unroll the cable completely before
plugging it in.
- Fill tray with water, respecting the
MAX and MIN levels.
- Fit the grill in 2 optional heights.
For higher, insert the grill 'legs' into
left hole (Fig. 3a). For lower, insert
into right hole (Fig.3b)
- Connect the appliance to the mains.
- Turn the thermostat control to the
desired temperature position. The
pilot light (D) will come on indicating
that the appliance is in the process of
heating up.
- Wait until the pilot light (D) has
gone out which will indicate that the
appliance has reached an adequate
temperature.
- Work with the food you want to
process.
- Place carefully on the grill the food
to be cooked.
- In order to minimize the generation
of acrylamide during the cooking
process, avoid to reach dark brown
colours on the foodstuffs.
- When the food is to your taste,
Manual Maxim's.indb 16
All manuals and user guides at all-guides.com
remove it from the appliance with the
help of a wooden spatula or similar
heat resistant implement.
- The water will evaporate during the
appliance's use, so that it will be
necessary to refill the water tray.
- When refilling, avoid dropping water
on the heating component.
Once you hace finished using the
appliance:
- Unplug the appliance to the mains.
- Clean the appliance
Cleaning
- Disconnect the appliance from the
mains and let it cool before underta-
king any cleaning task.
- Remove tray as shown in Fig. 2 for
cleaning.
- Clean the electrical equipment and
the mains connection with a damp
cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
- It is advisable to clean the applian-
ce regularly and remove any food
remains.
09/11/11 17:38

Publicité

loading