Philips SpeechMike LFH3220 Manuel De L'utilisateur page 9

4 Use your SpeechMike
This chapter describes how to use the
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
4.1 Create a recording
The dictation microphone must be
1
connected to the computer with the USB
cable.
Start SpeechExec dictation software.
2
Press the
3
RECORD
d
recording and enter
• The recorder window is displayed.
• The record indicator light flashes red (in
overwrite mode) or green (in insert mode).
Move the slide switch to the
4
and start speaking.
The record indicator light glows in red (in
overwrite mode) or green (in insert mode) while
recording.
For short pauses, move the slide switch to
5
the position. To continue recording,
f
move the slide switch back into the
position.
To stop recording, move the slide switch to
6
the position and press the
f
key.
Press the
7
• E OL/• • P RIO
recording as finished.
• The dictation file is moved to the
dictations folder.
• The recorder window closes and the work list
window is displayed.
To assign priority status to the recording,
8
press the
• E OL/• • P RIO
a second.
User manual
key to create a new
Record standby mode.
position
PLAY
PLAY
RECORD
d
key to mark the
Finished
key again within half
D Note
For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to 6
inches) away from your mouth.
9