Philips SpeechMike LFH3220 Manuel De L'utilisateur page 8

3 Get started
3.1 Installation
Recording and playback of dictations with the
SpeechMike requires dictation software such
as Philips SpeechExec to be installed on the
computer. When third-party dictation software
other than Philips SpeechExec is used, driver
software must be installed before connecting
the SpeechMike.
Important
C
Administrator rights are required to install
the software. For more help, contact your
administrator.
Turn on the computer.
1
Connect the dictation microphone to the
2
computer using the USB cable.
The New Hardware Found message is
3
displayed and installation will proceed
automatically.
D Note
If the message does not appear, verify if
the USB port is enabled in the BIOS of the
system. See the hardware documentation
for details, or contact your hardware
vendor.
Restart the PC when prompted by Windows.
4
Insert the installation CD in the CD-ROM
5
drive. The set-up program should start
automatically. If it does not, open the CD
contents in Windows Explorer and double-
click the autorun.exe file.
Click the Install
6
Follow the on-screen instructions of the
7
set-up program.
8
button.
User manual