Publicité
Les langues disponibles
Les langues disponibles
Check to make sure that all these parts were included in your packaging:
Bodyspray
Assembly
1. Cleaning the water supply pipe
Before installation, be sure to ush away any debris or foreign
materials from the water supply pipe.
2. Installation of the Body Spray
TBW07017U* Series
Body Spray
Installation of Supply Line Elbow
(1) End face of the built-in supply line elbow
joint is 0~10mm away from the nished wall
surface.
(2) Please ensure the effective thread depth in
the supply line elbow is at least 13.5mm
(17/32"), otherwise the water pipe supply
joint cannot be installed properly.
(As shown in Figure 1)
INCLUDED PARTS
Escutcheon
INSTALLATION PROCEDURE
Add Seal Tape or Te on Tape Here
Escutcheon
Shaft Gland
Finished Wall Surface
Supply Line
Elbow End
Face
0~10mm
3
Water Pipe
Supply Joint
Water Pipe
Supply Joint
Supply Line Elbow
Above
13.5mm
(Figure 1)
Publicité
