Thanks for Choosing TOTO! ............................................................................................. 2
Care & Cleaning ................................................................................................................. 2
Before Installation ............................................................................................................... 2
Common Tools Needed .................................................................................................... 2
Warnings.............................................................................................................................. 2
Included Parts ..................................................................................................................... 3
Installation Procedure .....................................................................................................3-5
Warranty .............................................................................................................................. 6
Rough-In Dimensions ...................................................................................................... 23
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and function
as a guiding principle. Congratulations on your choice.
Your new bodyspray is designed for years of trouble-free performance. Keep
it looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
Observe all local plumbing codes.
Make sure the water supply is shut off.
Read these instructions carefully to ensure proper installation.
TOTO reserves the right to update the product design without notice.
Adjustable
Wrench
For safe operation of the valve and sprays, please observe the following:
Recommended Operating pressure:
Minimum Pressure........20 psi (0.14 MPa), dynamic
Maximum Pressure.......80 psi (0.55 MPa), static
Do not solder the connections directly to the valve as damage to the internal
components may occur.
Do not use the product at an ambient temperature below 32°F (0°C).
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
CARE & CLEANING
BEFORE INSTALLATION
COMMON TOOLS NEEDED
Hex Wrench
12mm
WARNINGS
Hex Wrench
Pipe Tape
2.5mm
2
Hacksaw