i-box Rest Manuel D'instructions page 6

Control Panel
1. Power On/Off-long press,
Short press to switch modes
2. Play/Pause
3. Short press Vol-,
Long press for previous track
4. Short press Vol+,
Long press for next track
5. USB Port 5V��1A charging
6. Wireless charger
LED indicator
7. Mode LED indicator
8. AUX IN Port
9. 9V DC Power socket
Charging your Rest table speaker
Your Rest speaker has a built-in non user-replaceable Lithium battery allowing it to be
fully operational without being dependent on a connection to a wall socket. For best
results, the first time you use the speaker, let it charge for 4-5 hours until fully charged.
1. Plug the power adaptor supplied into a mains socket
2. Plug the power adaptor jack plug into the DC socket (9) on the back of the speaker
table. Make sure the mains socket is switched on. The table Mode LED (7) will light
up Red.
When the table is fully charged the Red LED will go out (and flash Blue in Bluetooth
pairing mode).
When disconnected the battery charge level will be affected by the speaker volume,
connection method and also the number and type of devices that are being charged.
When the battery level is low the Mode LED (7) will flash slowly and you will hear a
chime which will repeat every 20 seconds.
Powering your Table Speaker
Long press the power button (1) to switch on and enter Bluetooth mode (blue LED
(7) will fast flash). Long press and release the
Bluetooth Connection
With your table speaker in Bluetooth mode and the Mode LED (7) flashing Blue (or
steady red with flashing purple if the power adaptor is connected) enter the Bluetooth
menu on your phone or other Bluetooth device. Search for "i-box Rest" in the menu,
select and pair.
www.iboxstyle.com
1 2
5V OUT
5 6
Distributed by Philex Electronic Ltd.
Kingfisher Wharf, London Road, Bedford, MK42 0NX
power button (1) to switch off.
Designed in the UK
Made in China
3 4
19W28
AUX IN DC 9V
7 8 9
Rest | 06