i-box Rest Manuel D'instructions page 5

Box Contents
1x Table speaker, 4x Legs, 1x 9V��3.5A AC/DC Power adaptor
Assembling your Rest table speaker
Before you get started please read the safety information on pages 2-3.
1
4
Your Rest speaker is supplied with four legs with built in screws that fit into
corresponding threaded sockets on the underside of the speaker as shown above.
1. Place the speaker upside down on clean flat non abrasive surface with the leg
sockets facing upwards
2. Align the screw on the end of each leg with one of the threaded sockets on the
underside of the table and screw gently into position taking care not to cross
thread the screws. Make sure all four legs are screwed firmly into the sockets
then place the table upright close to a wall socket ready for charging.
05 | Rest
2
5
3