EINHELL TP-CS 18/190 Li BL Mode D'emploi page 13

•
Cordless circular saw
•
Saw blade
•
Saw blade wrench
•
Edge guide
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
The cordless hand-held circular saw is designed
for sawing straight cuts in wood, wood-type
materials and plastics. When you are cutting
plastics, avoid overheating the tips of the blade as
this could melt the material.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Anl_TP_CS_18_190_Li_BL_USA_SPK7.indb 13 Anl_TP_CS_18_190_Li_BL_USA_SPK7.indb 13
EN
4. Technical data
Motor power supply: ............................18 V
Idling speed: .............................3800 RPM (min
Cutting depth at 90°: ..................... 2-
Cutting depth at 45°: ...................... 1-
Saw blade: ............................... Ø 7-¼'' (184 mm)
Arbor: ............................................Ø ⅝'' (16 mm)
Blade thickness: ..............................1⁄16'' (1.6 mm)
Weight (Tool only): .................... 7.14 lbs (3.24 kg)
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's con-struction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
- 13 -
)
-1
⁄ '' (62 mm)
1
2
⁄ '' (43 mm)
3
4
19.04.2022 15:37:15 19.04.2022 15:37:15