1. connect the appliance to a properly installed wall socket
and set the temperature control (5) to its highest setting.
2. the red indicator light (2) lights up and the heating process
starts.
The waffle maker requires approx. 4-5 minutes to warm
up.
3. As soon as the necessary temperature is reached the red
indicator light (2) stays ON and the green indicator light (2)
lights up. Your waffle maker is now ready for operation.
4. Open the lid (1) by using the handle (3) and fill in the batter
in the centre of the lower plate.
5. close the lid (1) carefully.
the desired browning level of the waffles can be
controlled by the temperature control switch (5).
Tip: to guarantee an even browning process grease both
waffle plates with some oil / butter.
6. Depending on the thickness and content of the waffle
batter, the waffles will take between 4 - 6 minutes until
ready.
Open the waffle maker a bit to see whether your waffle is
brown enough. If not, let the waffle bake some more.
7. to remove your waffle use a wooden or plastic spatula to
avoid damage to the non-stick coating of the plates.
8. I f you wish to prepare a series of waffles repeat a. m.
steps.
9. to switch off the appliance, switch the temperature
control (5) to 1 (lowest level) and disconnect it from the
mains (6).
10. Let it completely cool down while opened to full extend.
Instruction Manual
ENGLISH
19