Lenze E82ZBU Mode D'emploi page 7

All manuals and user guides at all-guides.com
The switch/potentiometer unit can be mounted to the heatsink of a motec or a wall.
Mounting to the heatsink of a motec
Wall mounting
Mechanical installation
0
- 2 -
4. Mount the mounting plate with 2
screws M4 x 20 and 2 spring steel
0
sheets to the heat sink.
5. Wire the switch/potentiometer unit
- to the standard-I/O
- to the application-I/O
&
6. Assemble the motec
Mounting Instructions for motec
7. Mount the switch/potentiometer unit
with 4 screws M4 x 30
mounting plate.
1. Mount the mounting plate to the wall
using appropriate screws
2. Mount the switch/potentiometer unit
with 4 screws M4 x 30 to the
mounting plate.
3. Wire the switch/potentiometer unit
- to the Standard-I/O
- to the Application-I/O
&
4. Assemble the motec
Mounting Instructions for motec
&
&
3
4
1
to the
&
&
3
4
MA82ZBU 1.0