MAINTENANCE
Auto Station:
Infrared lens X2
Charging and dust collection sensor plates X2
Infrared lens
Charging and dust collection
sensor plates
BATTERY
· The robot is furnished with high-performance lithium-ion batteries.
· To maintain battery performance, please keep the robot charged in daily use
· If the machine is left unused for any length of time, please shut down and
keep it properly.
· Charge it at least every three months to avoid damaging batteries due to
excessive discharge.
FIRMWARE UPGRADE
· Upgrade rmware using the Bluebot app. If new rmware is detected,
upgrade it according to the report.
· The battery level should be ≥ 50% during rmware upgrade, so if needed the
machine should be placed on the charging/ auto station to charge before the
rmware upgrade takes place.
· Power failure restart. When the button is not responding or can not be
turned o , reset the button with the pin length for one second, and the
robot will restart the power.
EN
19