Publicité
Les langues disponibles
Les langues disponibles
CS.VTR.IST-1 / Rev 1.2
ENGLISH
After having removed the two inspection plates in the picture
(fig.
9), clean the right and left flue gas conduits with a brush
(fig.
10).
11
12
Remove the front panel below. To remove it, unscrew both screws
(fig. 11 and
12).
On VIKTOR 10, VIKTOR 12, TJALLMO the bottom front panel is fastened with a hinge and, therefore, does not need to be removed.
13
14
After having removed the front panel below
(fig.
13), remove the inspection vent, unscrewing the two screws
(fig.
14).
15
16
After having removed the vent, vacuum the residues inside the compartment
(fig.
15).
To ensure correct operation, it is necessary to remove the sawdust deposited on the base of the tank
(fig. 16)
at least once every 30 days. The pellet
tank must be emptied at the end of every season.
Cleaning the vermiculite
The vermiculite does not require special maintenance and if required should only be gently dusted with a brush. In order not to compromise its working
life, cleaning should not be carried out using abrasive sponges or using the vacuum cleaner pipe in direct contact.
25
Publicité
