Publicité
Les langues disponibles
Les langues disponibles
OM 4029
COMPONENTS
1. Tightener Ø 50mm
2. Tightener Ø 32mm
3. Elastic belt remover
4. Screw M8x25 Ø 5,9mm
5. Screw M8x40 Ø 5,7mm
6. Screw M8x65 Ø 5,6mm L 32,5
7. Screw M8x65 Ø 5,9mm L 11,5
8. Locking pin + nut M8
Belt disassembling
• Mount the elastic belt remover on the pulley (n°3) in the part indicated by the arrow in the image A.
• Choose and screw on the remover the supplied screws accordingly to the dimensions of the pulley, the screw
must slide into the slot, then lock it with the nut and the pin.
Warning : the screw has to lean on the bottom of the pulley.
• Use the suitable key to turn the pulley, rotate following engine rotation, and keep the tightener in its position (pic . B)
• Then rotate the pulley until the complete belt removal (pic. C)
All manuals and user guides at all-guides.com
STRETCH BELT INSTALLATION AND REMOVAL TOOL
USE
3
4
7
6
5
8
2
1
Publicité
