Publicité
Les langues disponibles
Les langues disponibles
TEMPERATURE CONTROL
The fridge is controlled with a temperature control knob located inside it.
Adjust the control knob as desired to suit your individual preference.
0 is off setting
1 is cold setting
7 is coldest setting
In the off position (0) the appliance does not operate (the cooling system is switched off), but power
supply is not interrupted.
The running time and temperature are affected by where the fridge is located, how often the door is
opened and the temperature of the room the fridge is located in.
When you use the appliance for the first time or after defrosting, adjust the control knob to the coldest
setting for at least 2 hours before introducing food to be stored, and then readjust to the middle setting.
MOVING YOUR APPLIANCE
If the appliance is turned off for any reason, wait for 10 minutes before turning it back on. This will allow
the refrigeration system pressures to equalise before restarting.
x Turn off the appliance and unplug it from the mains socket. Remove all food. Also remove all mobile
parts (shelves, accessories, etc.) or fix them into the fridge to avoid any shock.
x Relocate and install. If the appliance has been left on its side for any length of time, leave it standing
upright for at least 10 minutes before turning on.
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally friendly
and natural gas, it is explosive. Therefore you should be careful during shipment and installation to
prevent your appliance's cooler elements from being damaged. In the event of a leak caused by damage
to the cooler elements, move your fridge from open flame or heat sources and ventilate the room where
the appliance is located for a few minutes.
GB-8
Publicité
