Roger Technology AGILIK Serie Instructions Et Avertissements Pour L'installateur page 18

MODIFICATIONS
! Warning: do not modify or replace parts of the product without
written and signed authorization by the manufacturer. Modifications or
replacements that are not authorized in writing may cause damage to
people, animals and property. Each modification or replacement of parts
made and not authorized in writing by the manufacturer is prohibited and
release the manufacturer from any direct and indirect liability arising from
damages to persons and property.
4
DESCRIPTION OF THE PRODUCT
The Agilik series automatic road barrier is available in 4 standard models,
described below; also, it is possible to customize installation with the various
standard accessories described in detail in this installation manual.
4.1) Models and characteristics:
Agilik brushless 36V DC Barrier for bars up to 4
metres, with on-board control unit, absolute encoder,
AG/004
complete with fixing base with tie rods and screws,
and bar fixing flange.
Agilik brushless 36V DC Barrier for bars up to 4
metres, with on-board control unit, absolute encoder,
AG/004/115V
complete with fixing base with tie rods and screws,
and bar fixing flange. For line voltages of 115V.
Agilik brushless 36V DC Barrier for bars up to 4
metres, with on-board control unit, absolute encoder,
AG/004/IS complete with fixing base with tie rods and screws,
and bar fixing flange. Frame made in Brushed stainless
steel AISI 304
Agilik brushless 36V DC Barrier for bars up to 6
metres, with on-board control unit, absolute encoder,
AG/006
complete with fixing base with tie rods and screws,
and bar fixing flange.
Agilik brushless 36V DC Barrier for bars up to 6
metres, with on-board control unit, absolute encoder,
AG/006/115V
complete with fixing base with tie rods and screws,
and bar fixing flange. For line voltages of 115V.
Agilik brushless 36V DC Barrier for bars up to 6
metres, with on-board control unit, absolute encoder,
AS/006/IS complete with fixing base with tie rods and screws,
and bar fixing flange. Frame made in Brushed stainless
steel AISI 304
5
TECHNICAL CHARACTERISTICS
AG SERIES
BARRIER
FREQUENCY OF USE
TRAVEL CONTROL SYSTEM
POWER SUPPLY
MOTOR POWER SUPPLY
POWER CONSUMPTION
POWER MOTOR
TORQUE
OPEN / CLOSE TIME 90 °
OPERATING TEMPERATURE
ACCESSORIES POWER SUPPLY
CONTROL UNIT (INTEGRATED)
RELEASE SYSTEM
PROTECTION RATING
EMERGENCY BATTERY
OPERATING CYCLES PER DAY (OPENING/
CLOSING - 24 HOURS NO STOP)
18
All manuals and user guides at all-guides.com
AG/004
UP TO 4 METRES
SUPER INTENSIVE
ABSOLUTE ENCODER
DIGITAL
230 V AC - 50 Hz ±10%
FROM 0 TO 36 V DC
FROM 0 TO 15 A
200 W
FROM 0 TO 200 Nm
FROM 2 TO 6 seconds
-20 +55 °C
24 V DC
DIGITAL CONTROLLER
36V DC
KEY WITH DIN CYLINDER KEY WITH DIN CYLINDER
IP 54
AVAILABLE (OPTIONAL) AVAILABLE (OPTIONAL)
n° 5000
4.2) Accessories list:
See Fig. 1
1) Carbon steel barrier assembly cabinet with anti-corrosion treatment,
painted.
2) Aluminium bar support base, die-cast, painted.
3) Extruded aluminium bar, painted white.
4) Galvanized steel omega support for securing the bar.
5) Aluminium bar fixing cover, die-cast, painted.
6) Aluminium head, die-cast, painted.
7) Semi-transparent flashing cover.
8) Digital control unit.
9) Mechanical stop in opening and closing
10) Galvanized steel spring fixing arm.
11) Geared motor complete with brushless motor and absolute encoder.
12) Key release with DIN cylinder.
13) Corrosion-resistant steel closing door, painted.
14) AG/BA2/01 elliptical bar up to 2 metres made of aluminium, painted
white, with slot cover profiles and shockproof rubber.
15) AG/BA3/01 elliptical bar up to 3 metres made of aluminium, painted
white, with slot cover profiles and shockproof rubber.
16) AG/BA4/01 elliptical bar up to 4 metres made of aluminium, painted
white, with slot cover profiles and shockproof rubber.
17) AG/BA6/01 elliptical bar up to 6 metres made of aluminium, painted
white, with slot cover profiles and shockproof rubber.
18) KT230 Galvanised foundation plate for securing the barrier.
19) AG/SP72/01 Ø 72 spring for bars of up to 4 metres.
20) AG/SP83/01 Ø 83 spring for bars of up to 6 metres.
21) AG/BLED Flashing LED 4-board circuit.
22) AG/ALED6C - AG/ALED/8C - AG/ALED/12C Strip LED 6 - 8 - 12 metres with
connections cable.
23) AG/BAMS/01 Mobile support for bars.
24) KT231 Fixed support foundation plate.
25) AG/BAFS/01 Fixed support with rubber, non-adjustable.
26) AG/BAFS/03 Fixed support with rubber, non-adjustable, with provision
of a bolt.
27) AG/BAFS/02 Fixed support with rubber, adjustable, telescopic.
28) AG/BAFS/04 Fixed support with rubber, adjustable, telescopic, with
provision of a bolt.
29) AG/BAJ/01 Internal connection joint made of anodized aluminium.
30) Emergency batteries module (optional).
31) Pack of No. 40 reflective adhesive strips for the bar.
AG/004/115V
UP TO 4 METRES
SUPER INTENSIVE
ABSOLUTE ENCODER ABSOLUTE ENCODER
DIGITAL
115 V AC 60 HZ ±10% 230 V AC - 50 Hz ±10%
FROM 0 TO 36 V DC FROM 0 TO 36 V DC
FROM 0 TO 15 A
200 W
FROM 0 TO 200 Nm FROM 0 TO 200 Nm
FROM 2 TO 6 seconds FROM 4 TO 8 seconds
-20 +55 °C
24 V DC
DIGITAL CONTROLLER DIGITAL CONTROLLER
36V DC
KEY WITH DIN CYLINDER
IP 54
AVAILABLE (OPTIONAL)
n° 5000
AG/006
UP TO 6 METRES UP TO 6 METRES
SUPER INTENSIVE SUPER INTENSIVE
ABSOLUTE ENCODER
DIGITAL
115 V AC 60 HZ ±10%
FROM 0 TO 36 V DC
FROM 0 TO 15 A FROM 0 TO 15 A
200 W
FROM 0 TO 200 Nm
FROM 4 TO 8 seconds
-20 +55 °C
24 V DC
DIGITAL CONTROLLER
36V DC
KEY WITH DIN CYLINDER
IP 54
AVAILABLE (OPTIONAL)
n° 4000
AG/006/115V
DIGITAL
200 W
-20 +55 °C
24 V DC
36V DC
IP 54
n° 4000