Siemens KA D Serie Notice D'utilisation Et De Montage page 49

Using the ice and water dispenser
The ice and water dispenser only works when the
appliance is connected to the water mains.
When the appliance has been switched on, it takes
approx. 24 hours until the first batch of ice cubes are
ready.
When the appliance has been connected, there are
still air bubbles in the lines.
Run off drinking water and pour away until water can
be dispensed without bubbles. Pour away the first
5 glasses.
When using the ice maker for the first time, do not
use the first 30 - 40 ice cubes for reasons of hygiene.
Operating the ice maker
When the freezer compartment has reached its
freezing temperature, water flows into the ice maker
and freezes into ice cubes. When the ice cubes are
ready, they are automatically discharged into the ice
cube container.
Occasionally the sides of the ice cubes stick together.
When they are conveyed to the outlet opening, they
usually break away from each other.
When the ice cube container is full, ice making
switches off automatically.
The ice maker can make approx. 140 ice cubes within
24 hours.
When ice cubes are being made, the buzzing water
valve, the water flowing into the ice cube tray and the
falling ice cubes can be heard.
Observing drinking water quality
All materials used in the drinks dispenser are
odourless and tasteless.
If the water has an aftertaste, this may be caused by:
Mineral and chlorine content of the drinking water.
n
Material of the domestic water line and connection
n
line.
Freshness of the drinking water. If water has not
n
been dispensed for a long time, the water may have
a "stale" taste. In this case fill approx. 15 glasses of
water and throw away.
We recommend that you regularly dispense a little
fresh water from the water maker and that you do not
switch off the appliance. This will ensure that the best
water quality is retained.
The enclosed water filter will filter only particles out
of the supply water, not bacteria or microbes.
All manuals and user guides at all-guides.com
Switching the ice/water dispenser on and
off
Tap:
| Main menu | Æ | Settings
| Ice/water dispenser
Switching on
Tap "ON".
n
Switching off
1. Tap "OFF".
2. Empty and clean the ice cube container.
3. Reinsert the container. Ensure that the ice cube
container clicks into its support.
Dispensing ice/water
Select the button for dispensing ice and water
n
(water, crushed ice or ice cubes).
Keep pressing the button until the required quantity
n
is in the glass.
Dispensing water:
Tip:
The water from the water dispenser is cooled to a
palatable temperature. If you would like the water
colder, place ice cubes in the glass before dispensing
the water.
| Æ
| Æ
en
49