Forch 5423 56 Manuel D'instructions page 7

Ultra-flat LED Worklight
ENG
Technical Data:
Lamp and Features:
Illuminant: 10 W COB LED/ 1 W SMD LED (Spot LED) - controlled by 2 switches
Battery: Lithium-Ion 3.7 V DC, 2,600 mAh
Running time: approx. 2.5 h (COB LED - 100 % output)/ approx. 10 h (Spot LED)
Charging time: approx. 3.5 h - 4.0 h
Brightness: approx. 475 lm (COB LED - 100 % output)/ approx. 120 lm (Spot LED)
IP rating: IP54
Rotating dimmer switch - the COB LED is dimmable
Charger
(Power charger, model HNFL050100UE):
Voltage: AC 100 V - 240 V
Frequency: 50/60 Hz
Charger output: 5.0 V DC, 1,000 mA
Instructions for use:
■
The five-level battery charging indicator will show one flashing LED when charging is re-
quired.
■
Switch off the lamp before connecting to the charger.
■
Connect the charger to the lamp and then to the power supply.
■
The five-level battery charging indicator on the lamp will show the charging progress
until all five LEDs are shining green, then the charging is completed.
Caution:
■
Fully charge the lamp before first use for 10 h.
■
Switch off the lamp when the lamp is not in use.
■ Do not look directly into the light beam.
■ Do not leave the lamp in a fully discharged condition.
■ If the lamp will be stored for one month or more, please fully charge it prior to storage.
■ CAUTION: MAX INPUT 5.0 V DC / 2 A
All manuals and user guides at all-guides.com