Publicité
Les langues disponibles
Les langues disponibles
EN
Lubricants
The standard lubricant range suitable for simalube includes modern high quality lubri-
cants tested and modified for the special requirements of grease and oil dispensers.
Datasheets are available online for all lubricants. Please refer to these datasheets for
the instructions/safety regulations of the grease/oil manufacturers.
Lubricant range on simatec.com
https://simatec.com/en/simalube/overview/lubricants
Lubricant range for USA and Canada on simatec.com
https://simatec-usa.com/en/simalube/overview/lubricants
simalube can also be delivered filled with other lubricants or as an empty unit. Ask
for advice. The operation of simalube with oils of different viscosities is also possible.
Accessories
Note: Use only original accessories. If you have technically demanding or unusual appli-
cations, please contact our Technical Department or your local distributor. More accessories
at simatec.com
Accessories range on simatec.com
https://simatec.com/en/simalube/accessories
EU Declaration of conformity
simatec ag
Stadthof 2, CH-3380 Wangen a. Aare, Switzerland declares that the
single point lubricators
simalube 15
are designed and manufactured in accordance with
Directive 2014/34/EU of the European Parliament and the Council on the
harmonisation of the laws of the Member States relating to equipment and
protective systems intended for use in potentially explosive atmospheres
The following standards have been applied:
EN 60079-0:2018, EN 60079-11:2012
Notified Body:
DEKRA Certification B.V., 6825 MJ Arnhem
Identification number: 0344
Certificate No: KEMA 09ATEX0098X
Wangen a. Aare, den 03.04.2023
Mischa Wyssmann, Managing Director CEO
Manufactured by:
simatec ag
Stadthof 2, CH-3380 Wangen a. Aare
www.simalube.com
12
Publicité
