Busch-Jaeger Busch-Transcontrol HF 6866 AG Manuel D'utilisation page 37

All manuals and user guides at all-guides.com
Fields of Application/Function
System Information
The basic components of the cordless Busch Transcontrol
Transmitter and Receiver. Each transmitter module is provided ex works with a
code and, due to its complex design, can be combined, inter alia, with the
following Busch products:
- Angle adapter 6886
- FM switches or other 230 V sensing elements.
One HF receiver is programmed to the code of the transmitter module used or
manual transmitter (max. 6 transmitters per HF receiver channel) and controlled
on the basis of the switching signals received
- Internal and external lighting.
Device-specific Information
The purpose of the Busch Transcontrol
referred tor as HF Receiver 6866 AG) with 3 channels is to switch, or control via
pushbutton, three independent consumers via any Transmitter in the Busch
Transcontrol ® HF System.
Each channel is controllable via at least 6 different addresses. Each individual
channel can be changed from switch to pushbutton mode via a coding switch
integrated in the device.
In the case of control via the Busch Transcontrol
the first two channels can be combined in order to allow direct control of electric
drives with clockwise/anti-clockwise rotation.
Consequently, the device which is very easy to install allows the direct connection
of - blinds/awnings
- garage door drives, etc.
CAUTION
If the Transcontrol HF is used in combination with garage door drives, etc.,
it must be ensured that no persons are in the area of movement!
® HF Receiver 6866 AG (hereinafter
® HF Manual Transmitter 6861,
GB
®
HF System are the