Parker SCPS01 Manuel D'utilisation page 73

All manuals and user guides at all-guides.com
Window function, NO contact
If the current measured pressure
value is in the range between
Window High and Windows Low
then the output is turned on.
Otherwise it is turned off. A static
hysteresis is set for both points
(± 0.5% FS).
 Click on the Write Settings button in order to transfer the current con-
figuration to the switch.
Window function, NC contact
If the current measured pressure
value is in the range between
Window High and Windows Low
then the output is turned off.
Otherwise it is turned on. A static
hysteresis is set for both points
(± 0.5% FS).
61