PowerWalker VI 400 SCL Guide Rapide page 2

ENGLISH
Back Panel:
PowerWalker VI 400-800 SCL
PowerWalker VI 1500-2000 SCL
PowerWalker VI 3000 SCL
Usage:
Display:
UPS VI 400-2000 SCL
Mode touch display
Power on
Standby
Mode
All manuals and user guides at all-guides.com
PowerWalker VI 600-3000 SCL
Quick Guide
You can turn on and turn off the unit by pressing the power switch.
Models in the range 400-2000 VA have touch display. You can change
the display content by touching it. If the backlight shuts off, you may
activate it by touching the screen.
PowerWalker VI 3000 SCL does not have touch display, all available
data are shown on the screen.
VI 3000 SCL
display
PowerWalker VI 1000 SCL
A. Output sockets
B. AC input
C. Fuse / circuit breaker
D. USB port with HID support
E. Ethernet line surge protection
F. Cooling fan (only for 1500-3000 VA
models
1. Output sockets
2. AC input
3. Circuit breaker
4. Ethernet line surge protection
5. RS232 port
6. USB port
When UPS is powered on, it will enter this
mode for few seconds.
No output is provided.
Description