Publicité
All manuals and user guides at all-guides.com
¾ For charging, use the supplied USB cable [8] in conjunction
with the supplied adapters (12 V or 230 V) or a suitable USB
interface.
¾ Switch the device off before connecting it for charging.
▸ Connect the USB-in charging socket of the device with the USB
cable [8] and the corresponding adapter.
3 The LEDs pulse slowly during the charging process until the
internal battery is fully charged.
3 Once full charging capacity has been reached, the green 100%
LED lights up permanently and the other LEDs (25%, 50%, 75%)
go out.
3 The green 100% LED flashes from time to time (charge
conservation).
▸ After charging, disconnect the device from the voltage source.
Note
Charge the device for 24 hours before using it for the
first time!
Note
During charging, the charging status of the internal bat-
tery is indicated by the four charge status LEDs.
Remote start of a vehicle engine
Danger when working near to car batteries (lead
acid).
Batteries build up explosive gases during opera-
Â
tion.
¾ Wear suitable protective clothing and eye
protection.
¾ Never smoke around the batteries, hold naked
flames to them, and avoid spark development.
Charging
Attention!
WARNING!
15
Publicité
