Télécharger Imprimer la page

Panasonic Viera TC-L32DT30 Mode D'emploi page 8

Publicité

Les langues disponibles

Les langues disponibles

Optional Accessories
3D Eyewear
(Rechargeable type)
TY-EW3D2S
TY-EW3D2L
Communication Camera
TY-CC10W
Wall-hanging bracket
TY-WK3L2RW
The angle of wall-hanging bracket
can be adjusted in "zero tilting
(vertical)", "5-degree tilting" and
"10-degree tilting"for this TV.
WARNING
Customer assumes liability if mounting the unit themselves or if a Panasonic bracket is not used. Any damage resulting
from not having a professional installer mount your unit will void your warranty.
Always be sure to ask a qualified technician to perform any necessary set-up. Incorrect fitting may cause equipment to
fall, resulting in injury and product damage.
Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall
before hanging the bracket.
When using an angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting cables
so that they do not press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
8
All manuals and user guides at all-guides.com
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
• Product information (Model No. and release date etc.) is subject to change
TY-EW3D2M
without notice.
• For more product information
(USA) http://www.panasonic.com (Canada) http://panasonic.ca
(Global reference) http://panasonic.net/avc/viera/3d/
• This camera can be used on VIERA Connect.
• For details, read the manual of the Communication Camera.
Back of the TV
Holes for wall-hanging bracket
installation
a: 7.9 " (200 mm)
b: 7.9 " (200 mm)
Installing the remote's batteries
Pull open
Hook
Screw for fixing the TV onto the
wall-hanging bracket
a
(not supplied with the TV)
b
(View from the side)
Close
Note the correct
polarity (+ or -).
Depth of screw:
Minimum: 0.16 " (4.0 mm)
Maximum: 0.43 " (11.0 mm)
M6
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.

Publicité

loading

Ce manuel est également adapté pour:

Viera tc-l37dt30