Ayce KSE 40/2400 Traduction De La Notice Originale page 121

All manuals and user guides at all-guides.com
fig.24
Normal guide bar maintenance (fig.25)
1. Remove guide bar from chain saw.
2. Remove sawdust from guide bar groove periodically. Use putty knife or wire,
3. Clean oil slots after each day of use.
4. Remove burrs from sides of guide bar. Use flat file to make side edges square.
Replace guide bar when:
- Bar is bent or cracked.
- Inside groove of bar is badly worn.
fig.25
120 , 121