Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
- Observe the size of wood shavings. If they become dusty your chain could need
sharpening.
Avoid kickback. Kickback can result in severe injury or death.
Do not operate chain saw while
- In a tree.
- On a ladder or any other unstable surface
- In any awkward position
You may lose control of saw causing severe injury.
do not cut limbs higher than your shoulders.
Trimming a tree is the process of cutting limbs from a living tree, makes sure your footing is
firm keep feet apart. Divide your weight evenly on both feet. Follow directions below to trim a
tree.
1. Make first cut 15 centimeters from tree trunk on underside of limb, use top of guide bar
to make this cut. Cut 1/3 through diameter of limb
2. Move five to ten centimeters farther out on limb, make second cut from above limb.
Continue cut until you cut limb off.
3. Make third cut as close to tree trunk as possible on underside of limb stub. Use top of
guide bar to make this cut. Cut 1/3 through diameter of stub.
4. Make fourth cut directly above third cut. Cut down to meet third cut, this will remove
limb stub.
Seek professional help if facing conditions beyond your ability.
114 , 115
fig.16
Publicité
