FRICON SMR Serie Mode D'emploi page 30

SMR
•
In humid environments with a large concentration of salt, such as fish
markets, pay special attention so that water does not come directly into
contact with the compressor area.
•
Make sure that air circulates freely around the equipment and observe the
minimum distances illustrated in figure 2.
5.Electrical Connection
NOTES:
•
Connect the appliance to an outlet that has contact with the ground. This
connection is required.
•
Check if the power source's voltage and respective frequency correspond to
the recommendations in the appliance's characteristics label found on the
back (Fig.3).
All manuals and user guides at all-guides.com
Fig. 2 – Minimum Distances for Installation
29
English