Authorized Service - LGB 22300 Breitenau Instructions De Service

decoder, it must not be operated
with catenary power. Operate
decoder-equipped
track power only.
Lighting
This model features directional
lighting. The model has two „flat"
multi-purpose sockets, with remo-
vable covers, on the front and rear
of the loco (Fig.4). The sockets
can be used to provide track
power to cars with lighting or
sound electronics.
To remove the cover of the
socket, pull it straight out. If the
cover is tight, gently use a small
straight screwdriver to pry it out.
(Do not pull out the rectangular
outer housing.)
If your cars have the older,
"round" lighting connectors, use
the Light Socket Adapter (68334).
Power Supply
Attention! For safety and reliabi-
lity, operate this model with LGB
power supplies (transformers,
power packs and controls) only.
The use of non-LGB power sup-
plies will void your warranty.
Use this model with LGB power
supplies with an output of at
least 1 amp. For more informati-
on on LGB power supplies for
indoor, outdoor and multi-train
operation, see the LGB catalog.
Attention! After extended opera-
tion, this model may leave carbon
dust or other debris around the
track. This dust and debris can
stain carpet and other materials.
Consider this when setting up
your layout. Ernst Paul Lehmann
Patentwerk and LGB of America
are not liable for any damages.
SERVICE
Do-It-Yourself Service Levels
Level 1 - Beginner
Level 2 - Intermediate
Level 3 - Advanced
Attention! Improper service will
void your warranty. For quality
service, contact your authorized
retailer or an LGB factory service
station (see Authorized Servi-
ce).
Cleaning 1
This model can be cleaned exter-
nally using a mild detergent and
gentle stream of water. Do not
immerse this model.
8
locos with
Replacing the light bulbs 1
Lanterns: Remove the ring aro-
und the lantern lens. Carefully pry
the lens away from the lantern.
Using tweezers, remove and
replace the bulb. Reassemble.
Replacing the motor
- Under the model, there is a
screw on each corner of the
model. Remove all four screws.
- Pull out the gearbox.
- Disconnect the wiring cables on
the gearbox.
- Remove the two screws on top
of the gearbox and take off the
gearbox cover.
- Replace the motor. Reassemble.
Attention! If the motor is remo-
ved, generously lubricate the
gears with LGB Gear Lubricant
(51020).
Replacing the brushes, pick-up
shoes or wheelsets 3
- Remove the four screws on the
bottom of the gearbox.
- Remove the bottom gearbox
cover.
- Replace the brushes, pick-up
shoes or wheelsets.
- Reassemble.
Attention! If the wheelsets are
removed, generously lubricate
the gears with LGB Gear Lubri-
cant (51020).
Maintenance parts
50019 Maintenance Oil
51020 Gear Lubricant
55020 Multi-Train System Deco-
der
62201 Standard Motor
63120 Brushes, 14mm, 16mm,
8 pieces
63218 Standard
Shoes, 2 pieces
63303 Scissor-Type
graph, red
68511 Plug-In Bulb, Clear, 5V,
10 pieces

AUTHORIZED SERVICE

Improper service will void your
warranty. For quality service,
contact your authorized retailer or
one of the following LGB factory
service stations:
Pick-Up
Panto-