Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
3. Pressing button B resets the chronograph and all chronograph hands
will return to zero position.
Chronograph calibration
(incl. after replacing the battery)
This procedure should be performed when the chronograph hands do not
return to zero position after the chronograph has been reset, and proper-
ly after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button A to set the chronograph second hand to zero position.
3. Press button B to set the chronograph 1/120 second hand to zero
position. The chronograph hand can, be advanced rapidly by continous-
ly pressing button A or B.
4. When the hands have been reset to zero position the crown should be
pushed back in normal position.
5. Press button B to check that the chronograph hands are reset to zero
position.
Do not push the crown to the normal position, while the chronograph
hands return to zero position. Each hands stop on the way when crown
are returned to normal position and these positions are recognized as
zero position.otherwise each handwill stop at its respective position and
recognize this as zero position.
EN
17
Publicité
