17. Make sure the heater is on a stable, secure surface to eliminate the potential of
tipping it over.
18. We do not recommend use of an extension cord as it may overheat and cause a risk
of fire. However, if you have to use an extension cord, the cord should be No. 14
AWG minimum size and rated not less than 1875 watts, and has to be used only for
supplying power to this heater.
19. Be sure that the plug is fully inserted into appropriate receptacle. Please remember
that receptacles also deteriorate due to aging and continuous use: check periodically
for signs of overheating or deformations evidenced by the plug. Do not use the
receptacle and CALL your electrician.
20. Check that neither the appliance nor the power cable has been damaged in any way
during transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left
between elements of the appliance. It may be necessary to pass over the appliance
with a vacuum cleaner.
CAUTION
: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER
YOURSELF. DOING SO COULD VOID THE WARRANTY AND CAUSE
DAMAGE OR PERSONAL INJURY.
SAVE THESE INSTRUCTIONS
All manuals and user guides at all-guides.com
4