Motomaster 011-2062-4 Guide Du Produit page 4

6
model no.011-2062-4
2
1
6
5
7
1. Main Power Button
2. Internal Battery Level LED Indicator
3. Smart Jumper Cables Socket (under protective cover)
4. USB IN port
5. LED Flashlight
6. USB OUT port (x2)
7. 12V Car Charger Adaptor
8. USB Charge Cable
9. Smart Jumper Cables
All manuals and user guides at all-guides.com
contact us 1 888 942-6686
3
4
8
9
Getting Started
This product comes partially charged and needs to be fully charged prior to use.
Carefully read and understand the vehicle owner's manual on specific precautions
and recommended methods for jump starting the vehicle. Make sure to determine
the voltage and chemistry of the battery by referring to your battery owner's manual
prior to using this product. This product is for jump starting 12 volt lead acid batteries only.
Recharging
IMPORTANT!
Improper charging may result in damage to the unit.
Ensure that there are no 12 V DC appliances connected to the unit while being recharged.
Do not operate any of this unit's functions while charging is in progress.
Do not recharge the unit while connected to an external battery.
Recharge battery after each use or at least every 6 months when in storage to prolong
battery life and keep the unit ready for use.
Connect micro USB cable to the unit's USB IN port
1
Connect the other end of the micro USB cable to any powered USB power port such
2
as a laptop, 12V DC adaptor (included) or AC charging cube (not included)
7